Dell Studio XPS 1340 страница 1 Скачать руководство пользователя

Страница: 1 / 39

Dell™ Studio XPS™ 1340 Service Manual

Notes, Notices, and Cautions

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text:

Dell

XPS

, and the

DELL

logo are trademarks of Dell Inc.;

Bluetooth

is a registered trademark owned by Bluetooth SIG, Inc. and is used by Dell under

license.

Microsoft

Windows

Windows Vista

a n d

Windows Vista start button logo

are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or

other countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.

Model PP17S

December 2008 Rev. A00

Battery Latch Assembly

Flashing the BIOS

NOTE:

A NOTE indicates important information that helps you make better use of your computer.

NOTICE:

A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

CAUTION:

A CAUTION indicates a potential for property damage, personal injury, or death.

Содержание Studio XPS 1340








































Результаты поиска

Содержание Studio XPS 1340

Отзывы:

Похожие инструкции для Studio XPS 1340

Бренды по названию

Популярные бренды

Dell Studio XPS 1340, Руководство по обслуживанию

Результаты поиска

Содержание Studio XPS 1340

Отзывы:

Похожие инструкции для Studio XPS 1340

Бренды по названию

Популярные бренды