Replacing the touchpad
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
Topics:
•
•
Procedure
1
Align the screw holes on the touch pad with the screw holes on the palm-rest assembly, then slide the touch pad into the palm-rest
assembly at an angle.
2
Replace the two screws (M2x2) that secure the touch pad to the palm-rest assembly.
3
Insert the touch pad cable into the connector on the touch pad, then close the latch to secure the cable.
Post-requisites
1
Replace the
.
2
Replace the
.
16
26
Replacing the touchpad
