OSD Warning Messages
Factory Reset
Resets all OSD settings to the factory preset values.
PERSONALIZE
Allows you to adjust shortcut button for: 1. Brightness & Contrast 2. Preset Modes.
The following warning messages may appear on the screen to indicate that the monitor is out of synchronization.
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low
for the monitor to use. See
Specifications
for the Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode
is 1920 X 1080 at 60Hz.
When the monitor enters Power Save mode, one of the following messages appears :