4
Dell Networking SPR-RK3-MNT
| Installation Guide
This page is intentionally left blank.
Страница 1: ...o rack mount brackets Eight M4 x 8 mm Phillips Flat Head screws Four M6 x 15 mm Phillips Pan Head screws Four M6 cage nuts optional Four M6 clip nuts optional Suitable screwdrivers not included in this kit Installation Steps To install the device in a two point 19 48 26 cm rack system 1 Place the mounting brackets over the mounting holes near the front on either sides of the device see Figure 1 NO...
Страница 2: ...them on the front rails two per rail aligned horizontally 4 Mount the device in the rack using the four M6 x 15 mm Phillips Pan Head screws two per bracket and a suitable screwdriver see Figure 2 Figure 2 Rack Mounting W 7205 NOTE Leave a minimum of 10 cm 4 inches of space on the left and right side of the controller for proper air flow and ventilation Leave additional space in the front and the b...
Страница 3: ...NT Installation Guide 3 Contacting Dell Table 1 Contact Information Web Site Support Main Website dell com Contact Information dell com contactdell Support Website dell com support Documentation Website dell com support manuals ...
Страница 4: ...4 Dell Networking SPR RK3 MNT Installation Guide This page is intentionally left blank ...
