Dell SD630-S, Руководство пользователя

Страница: 13 / 163

Two-riser chassis
Figure 3. Back panel features (two PCIe expansion cards)
1. System identification button 2. System identification connector
3. iDRAC8 Enterprise port 4. PCIe expansion card slot (riser 1)
5. Serial connector 6. Video connector
7. USB ports (2) 8. PCIe expansion card slot (riser 2)
9. Ethernet connectors (4) 10. Power supply unit (PSU1)
11. Power supply unit (PSU2)
Table 3. Back panel features (two PCIe expansion cards)
Item Indicator, Button, or
Connector
Icon Description
1 System identification
button The identification buttons on the front and back
panels can be used to locate a particular system
within a rack. When one of these buttons is
pressed, the LCD panel on the front and the
system status indicator on the back flash until one
of the buttons is pressed again.
Press to toggle the system ID on and off. If the
system stops responding during POST, press and
hold the system ID button for more than five
seconds to enter BIOS progress mode.
To reset iDRAC (if not disabled in F2 iDRAC setup),
press and hold for more than 15 seconds.
2 System identification
connector Enables you to connect the optional system status
indicator assembly through the optional cable
management arm.
3 iDRAC8 Enterprise port Dedicated management port.
NOTE: The port is available for use only if the
iDRAC8 Enterprise license is installed on your
system.
13