•
Click
Yes
to opt out of using SupportAssist and proceed to the
Update Storage Center
page.
Review the SupportAssist Data Collection and Storage Agreement
The
SupportAssist Data Collection and Storage
page displays the text of the SupportAssist data agreement and allows you to accept or
opt out of using SupportAssist.
1
To allow SupportAssist to collect diagnostic data and send this information to technical support, select
By checking this box you
accept the above terms
.
2
Click
Next
.
3
If you did not select
By checking this box you accept the above terms
, the
SupportAssist Recommended
pane opens.
•
Click
No
to return to the
SupportAssist Data Collection and Storage
page and accept the agreement.
•
Click
Yes
to opt out of using SupportAssist and proceed to the
Update Storage Center
page.
4
If the Support data agreement is not accepted, the Storage Center cannot check for updates. To proceed without checking for
updates, click
Next
.
You will have to use the Storage Center Update Utility to update the Storage Center software before continuing. See the
Dell Storage
Center Update Utility Administrator’s Guide
or contact technical support for detailed instructions about using the Storage Center
Update Utility.
Provide Contact Information
Enter contact information for technical support to use when sending support-related communications from SupportAssist.
1
Specify the contact information.
2
To receive SupportAssist email messages, select
Yes, I would like to receive emails from SupportAssist when issues arise, including
hardware failure notifications
.
3
Select the preferred contact method, language, and available times.
4
Type a shipping address where replacement Storage Center components can be sent.
5
Click
Next
.
Update the Storage Center
The Storage Center attempts to contact the SupportAssist Update Server to check for updates. If you are not using SupportAssist, you
must use the Storage Center Update Utility to update the Storage Center software before continuing.
NOTE:
•
If no update is available, the
Storage Center Up to Date
page opens. Click
Next
.
•
If an update is available, the current and available versions are listed.
•
If you cannot update Storage Center using standard methods (or example, you have no Internet access) use the Storage Center
Update Utility to install Storage Center software updates. See the
Storage Center Update Utility Administrator’s Guide
or contact
technical support for instructions on how to proceed.
•
If the site uses a web proxy to access Internet, configure the proxy settings:
a
In the
Setup SupportAssist Proxy Settings
dialog box, select
Enabled
.
b
Specify the proxy settings.
c
Click
OK
.
Complete the Configuration and Continue With Setup
The Storage Center is now configured. The
Configuration Complete
page provides links to a Storage Manager tutorial and wizards to
perform the next setup tasks.
About this task
Configure iDRAC, configure a VMware host, or create volumes to complete setup tasks.
Discover and Configure the Storage Center
65
