Dell S6100, Руководство по настройке

Страница: 994 / 1743

To apply the redistribute filter to entries already present in the SA cache, use the
clear ip msdp sa-cache
local command.
ip msdp sa-filter
Permit or deny MSDP source active (SA) messages based on multicast source and/or group from the specified peer.
Syntax ip msdp sa-filter {in | out} peer-address list [access- list name ]
Remove this configuration using the
no ip msdp sa-filter {in | out} peer address list
[access- list name ]
command.
Parameters
in Enter the keyword
in
to enable incoming SA filtering.
out Enter the keyword
out
to enable outgoing SA filtering.
peer-address Enter the peer address of the MSDP peer in a dotted decimal format (A.B.C.D.).
access-list name Enter the name of an extended ACL that contains permitted SAs. If you do not use this
option, all local entries are blocked.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the E-Series.
994 Multicast Source Discovery Protocol (MSDP)