Dell S6100, Руководство по настройке

Страница: 990 / 1743

peer address Enter the peer address in a dotted decimal format (A.B.C.D.).
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
6.2.1.1 Introduced
Usage Information An MSDP mesh group is a mechanism for reducing SA flooding, typically in an intra-domain setting. When some
subset of a domain’s MSDP speakers are fully meshed, they can be configured into a mesh-group. If member X of
a mesh-group receives a SA message from an MSDP peer that is also a member of the mesh-group, member X
accepts the SA message and forwards it to all of its peers that are not part of the mesh-group. However, member
X cannot forward the SA message to other members of the mesh-group.
ip msdp originator-id
Configure the MSDP Originator ID.
Syntax ip msdp originator-id { interface }
To remove the originator-id, use the
no ip msdp originator-id { interface }
command.
Parameters
interface Enter the following keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then
the stack/slot/port/subport information.
• For a 25-Gigabit Ethernet interface, enter the keyword
twentyFiveGigE
then the
stack/slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the stack/
slot/port[/subport] information.
990 Multicast Source Discovery Protocol (MSDP)