Dell S6100, Руководство по настройке

Страница: 67 / 1743

Version Description
9.1(0.0) Introduced on S4810 and Z9000.
8.3.19.0 Introduced on S4820T.
Usage Information Include the colon (:) when entering this command. This command checks the specified flash memory for errors. If
errors are found, the command recommends that you format the flash.
CAUTION: If you elect to format the flash, all files – including the startup configuration file – are lost. If
you do decide to format the specified flash, consider saving the running configuration as the startup
configuration after formatting the flash (use the
write memory
command or
copy running-
config startup-config
command).
Related Commands
• copy — copy one file to another location.
• show file-systems — display information about the file systems on the system.
mkdir
Creates a directory on the NFS mounted file system.
Syntax mkdir nfsmount://mount-point/usrname
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S-Series.
Example
Dell# mkdir nfsmount:/nfs-mountpoint/guest
Dell#
Related Commands
• rmdir — remove a directory.
mount nfs
Mounts an NFS file system to a device.
Syntax mount nfs rhost:path mount-point [username password]
Parameters
Enter the following location keywords and information:
rhost:path Enter the remote hosts’s path directory.
File Management 67