Dell S6100, Руководство по настройке

Страница: 60 / 1743

cd
Change to a different working directory.
Syntax cd [flash: | usbflash:] < directory name and path >
Parameters
flash: Use the keyword
flash:
to change the current directory to internal flash and its sub
directories.
usbflash: Use the keyword
usbflash:
to change the current directory to the inserted USB.
directory name and
path Enter the directory name and path as follows:
directory name
([[flash://]directory_path])
NOTE: The
cd
command without any arguments will change the current directory to flash:
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added NFS mount support. Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
copy
Copy one file to another location. Dell Networking OS supports IPv4 and IPv6 addressing for FTP, HTTP, TFTP, and SCP (in the hostip
field).
Syntax copy source-file-url destination-file-url
Parameters
compressed-config Enter the keywords
compressed-config
to copy a file from the current system
configuration.
60 File Management