Dell S6100, Руководство по настройке

Страница: 347 / 1743

Version Description
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced
Usage Information Configuring this option retains the current best-path. When sessions are then reset, the oldest received path is
chosen as the best-path.
bgp client-to-client reflection
Allows you to enable route reflection between clients in a cluster.
Syntax bgp client-to-client reflection
To disable client-to-client reflection, use the
no bgp client-to-client reflection
command.
Defaults Enabled when a route reflector is configured.
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information Route reflection to clients is not necessary if all client routers are fully meshed.
Related Commands
• bgp cluster-id — assign an ID to a BGP cluster with two or more route reflectors.
• neighbor route-reflector-client — configure a route reflector and clients.
Border Gateway Protocol 347