Dell S6100, Руководство по настройке

Страница: 397 / 1743

neighbor route-reflector-client
Configure the router as a route reflector and the specified neighbors as members of the cluster.
Syntax neighbor { ip-address | peer-group-name } route-reflector-client
To remove one or more neighbors from a cluster, use the
no neighbor { ip-address | peer-group-
name } route-reflector-client
command. If you delete all members of a cluster, you also delete the
route-reflector configuration on the router.
Parameters
ip-address Enter the IP address of the neighbor in dotted decimal format.
peer-group-name Enter the name of the peer group.
All routers in the peer group receive routes from a route reflector.
Defaults Not configured.
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information
A route reflector reflects routes to the neighbors assigned to the cluster. Neighbors in the cluster do not need not
to be fully meshed. By default, when you use
no route reflector
, the internal BGP (IBGP) speakers in the
network must be fully meshed.
The first time you enter this command, the router configures as a route reflector and the specified BGP neighbors
configure as clients in the route-reflector cluster.
When you remove all clients of a route reflector using the
no neighbor route-reflector-client
command, the router no longer functions as a route reflector.
Border Gateway Protocol 397