Dell S6100, Руководство по настройке

Страница: 238 / 1743

9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.0.2.0 Introduced on the S6000.
8.4.2.1 Introduced on the E-Series TeraScale and S-Series.
8.2.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Introduced on the C-Series.
7.4.1.0 Added the
monitor
option.
Related Commands
deny – configures a filter to drop packets.
permit – configures a filter to forward packets.
Common MAC Access List Commands
The following commands are available within both MAC ACL modes (Standard and Extended) and do not have mode-specific options.
These commands allow you to clear, display, and assign MAC ACL configurations.
The platform supports both Ingress and Egress MAC ACLs.
The MAC ACL can be applied on Physical, Port-channel and VLAN interfaces. As per the specified rules in the ACL, the traffic on the
interface/ VLAN members or Port-channel members will be permitted or denied.
clear counters mac access-group
Clear counters for all or a specific MAC ACL.
Syntax clear counters mac access-group [ mac-list-name ]
Parameters
mac-list-name (OPTIONAL) Enter the name of a configured MAC access list.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
238 Access Control Lists (ACL)