Dell S6100, Руководство по настройке

Страница: 195 / 1743

no-drop Enter the keywords
no-drop
to match only the forwarded packets.
Defaults Not configured.
Command Modes CONFIGURATION-STANDARD-ACCESS-LIST
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.11(0.0) Added support for session–ID to the
monitor
parameter.
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.8(0.0) Added the no-drop parameter.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Add the DSCP value for ACL matching.
8.2.1.0 Allows ACL control of fragmented packets for IP (Layer 3) ACLs.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Added support for the non-contiguous mask and added the
monitor
option.
6.5.10 Expanded to include the optional QoS
order
priority for the ACL entry.
Usage Information
The
order
option is relevant in the context of the Policy QoS feature only. For more information, see the “Quality
of Service” section of the Dell Networking OS Configuration Guide .
Related Commands
• deny — assign a IP ACL filter to deny IP packets.
• ip access-list standard — create a standard ACL.
resequence access-list
Re-assign sequence numbers to entries of an existing access-list.
Syntax resequence access-list {ipv4 | ipv6 | mac} { access-list-name StartingSeqNum Step-to-Increment }
Access Control Lists (ACL) 195