Dell S6100, Руководство по настройке

Страница: 1694 / 1743

Command Modes VXLAN INSTANCE
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
Related Commands vxlan-instance — Enable VXLAN Instance configuration on the platform.
local-vtep-ip
Set the local IP Address to be used as the source IP for VXLAN tunnels.
Syntax local-vtep-ip IP Address
To disable the settings, use the
no local-vtep-ip
command.
Parameters
IP Address Enter the local IP Address to be used as a source for VXLAN tunnels.
Defaults None.
Command Modes VXLAN INSTANCE
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide .
Version Description
9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON, and
Z9100–ON.
Usage Information Use the
local-vtep-ip IP Address
command to set the local IP Address that would be used as source for
VXLAN tunnels.
max_backoff
Configures time to wait between connection attempts with controller.
Syntax max_backoff time
Parameters
time Enter the time in milliseconds. The range is from 1000-180000. The default value is 30000.
Defaults 30000
Command Modes VXLAN INSTANCE
1694 Virtual Extensible LAN (VXLAN)