Dell S6100, Руководство по настройке

Страница: 1587 / 1743

• action-manifest remove — remove the action-manifest file for an activity.
action-manifest remove
Remove the action-manifest file from Dell Networking OS.
Syntax action-manifest remove < local-file-name >}
Parameters
local-file-name Enter the name of the local action-manifest file. Allowable characters are: a to z, A to Z, 0
to 9, -, _, and space.
Command Modes
SUPPORTASSIST ACTIVITY FULL-TRANSFER
SUPPORTASSIST ACTIVITY EVENT-TRANSFER
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.11(0.0) Introduced on the M I/O Aggregator and FN IOM.
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
Usage Information To revert to the default action-manifest file, use the
action-manifest install
command. If necessary, you
can then remove the custom action-manifest file.
Related Commands
• action-manifest get — copy an action-manifest file for an activity to the system.
• action-manifest install — configure the action-manifest to use for a specific activity.
• action-manifest show — view the list of action-manifest for a specific activity.
action-manifest show
View the list of action-manifest for a specific activity.
Syntax action-manifest show {all}
Parameters
all Enter the keyword
all
to view the entire list of action-manifests that are available for an
activity.
Command Modes
SUPPORTASSIST ACTIVITY FULL-TRANSFER
SUPPORTASSIST ACTIVITY EVENT-TRANSFER
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
SupportAssist 1587