Dell S6100, Руководство по настройке

Страница: 1531 / 1743

logging on
Specify that debug or error messages are asynchronously logged to multiple destinations, such as the logging buffer, Syslog server, or
terminal lines.
Syntax logging on
To disable logging to logging buffer, Syslog server and terminal lines, use the
no logging on
command.
Defaults Enabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Usage Information When you use the
no logging on
command, messages are logged only to the console.
Related Commands
• logging — enable logging to the Syslog server.
• logging buffered — set the logging buffered parameters.
• logging console — set the logging console parameters.
• logging monitor — set the logging parameters for the terminal connections.
logging source-interface
Specify that the IP address of an interface is the source IP address of Syslog packets sent to the Syslog server.
Syntax logging source-interface interface
Simple Network Management Protocol (SNMP) and Syslog 1531