Version
Description
9.10(0.0)
Introduced on the S6100–ON.
9.8(1.0)
Introduced on the Z9100–ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000-ON.
9.2(1.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
E-Series legacy
command
Related Commands
•
— limit messages logged to the Syslog servers based on severity.
logging
Configure an IP address or host name of a Syslog server where logging messages are sent. Multiple logging servers of both IPv4 and/or
IPv6 can be configured.
Syntax
logging {
ip-address
|
ipv6-address
|
hostname
} {{udp {
port
}} | {tcp {port}}
[vrf
vrf-name
]
To disable logging, use the
no logging
command.
Parameters
ip-address
Enter the IPv4 address in dotted decimal format.
ipv6-address
Enter the IPv6 address in the x:x:x:x::X format.
NOTE:
The :: notation specifies successive hexadecimal fields of zeros.
hostname
Enter the name of a host already configured and recognized by the switch.
udp
Enter the keyword
udp
to enable transmission of log message over UDP followed by port
number. The default port is 514
tcp
Enter the keyword
tcp
to enable transmission of log message over TCP followed by port
number.
vrf
vrf-name
(Optional) Enter the keyword
vrf
and then the name of the VRF to enable the logging
process in VRF mode.
1522
Simple Network Management Protocol (SNMP) and Syslog
Содержание S6100
Страница 1: ...Dell Command Line Reference Guide for the S6100 ON System 9 11 2 0P1 ...
Страница 474: ...protocol list ttl0 ttl1 Dell 474 Control Plane Policing CoPP ...
Страница 979: ... show lldp neighbors display the LLDP neighbors Link Layer Discovery Protocol LLDP 979 ...
Страница 1627: ... uplink state group creates an uplink state group and enables the tracking of upstream links Uplink Failure Detection UFD 1627 ...
