Related Commands
•
— displays the SNMP engine and all the remote engines that are configured on the
router.
•
snmp — displays the SNMP running configuration.
snmp-server group
Configure a new SNMP group or a table that maps SNMP users to SNMP views.
Syntax
snmp-server group [
group_name
{1 | 2c | 3 {auth | noauth | priv}}] [read
name
]
[write
name
] [notify
name
] [access
access-list-name
| ipv6
access-list-name
|
access-list-name
ipv6
access-list-name
]]
To remove a specified group, use the
no snmp-server group [
group_name
{v1 | v2c | v3 {auth
| noauth | priv}}] [read
name
] [write
name
] [notify
name
] [access
access-list-
name
| ipv6
access-list-name
|
access-list-name
ipv6
access-list-name
]]
command.
Parameters
group_name
Enter a text string (up to 20 characters long) as the name of the group. The following
groups are created for mapping to read/write community/security-names (defaults):
•
v1v2creadg
— maps to a community/security-name with
ro
permissions.
•
1v2cwriteg
— maps to a community/security-name
rw
permissions.
1 | 2c | 3
(OPTIONAL) Enter the security model version number (
1
,
2c
, or
3
):
•
1
is the least secure version.
•
3
is the most secure of the security modes.
•
2c
allows transmission of informs and counter 64, which allows for integers twice the
width of what is normally allowed.
The default is
1
.
auth
(OPTIONAL) Enter the keyword
auth
to specify authentication of a packet without
encryption.
noauth
(OPTIONAL) Enter the keyword
noauth
to specify no authentication of a packet.
priv
(OPTIONAL) Enter the keyword
priv
to specify both authentication and then scrambling
of the packet.
read
name
(OPTIONAL) Enter the keyword
read
then a name (a string of up to 20 characters long)
as the read view name. The default is
GlobalView
and is assumed to be every object
belonging to the internet (1.3.6.1) OID space.
write
name
(OPTIONAL) Enter the keyword
write
then a name (a string of up to 20 characters
long) as the write view name.
notify
name
(OPTIONAL) Enter the keyword
notify
then a name (a string of up to 20 characters
long) as the notify view name.
access
access-list-
name
(Optional) Enter the standard IPv4 access list name (a string up to 16 characters long).
ipv6
access-list-
name
(Optional) Enter the keyword
ipv6
then the IPv6 access list name (a string up to 16
characters long).
1504
Simple Network Management Protocol (SNMP) and Syslog
Содержание S6100
Страница 1: ...Dell Command Line Reference Guide for the S6100 ON System 9 11 2 0P1 ...
Страница 474: ...protocol list ttl0 ttl1 Dell 474 Control Plane Policing CoPP ...
Страница 979: ... show lldp neighbors display the LLDP neighbors Link Layer Discovery Protocol LLDP 979 ...
Страница 1627: ... uplink state group creates an uplink state group and enables the tracking of upstream links Uplink Failure Detection UFD 1627 ...