Dell S6100, Руководство по настройке

Страница: 1419 / 1743

Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.5(0.1) Introduced on the Z9500.
9.4.(0.0) Introduced on the S-Series and Z-Series.
Usage Information You can associate a TACACS server group with a VRF.
Example
Related Commands
• aaa authentication login — specifies the login authentication method.
• tacacs-server key — configures a key for the TACACS server.
tacacs-server host
Specify a host.
Syntax tacacs-server host { hostname | ipv4-address | ipv6-address } [port number ]
[timeout seconds ] [key key ]
Parameters
hostname Enter the name of the server host.
ipv4-address | ipv6-
address
Enter the IPv4 address (A.B.C.D) or IPv6 address (X:X:X:X::X) of the server
host.
port number (OPTIONAL) Enter the keyword
port
then a number as the port to be used by the
server. The range is from zero (0) to 65535. The default is 49 .
timeout seconds (OPTIONAL) Enter the keyword
timeout
then the number of seconds the switch waits
for a reply from the server. The range is from 0 to 1000. The default is 10
seconds .
key key
(OPTIONAL) Enter the keyword
key
then a string up to 42 characters long as the
authentication key. This authentication key must match the key specified in the
tacacs-
server key
for the daemon.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
Security 1419