Dell S6100, Руководство по настройке

Страница: 1238 / 1743

Version Description
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series and S-Series.
Usage Information The list of secondary VLANs can be:
• Specified in comma-delimited or hyphenated-range format.
• Specified with this command even before they have been created.
• Amended by specifying the new secondary VLAN to be added to the list.
Related Commands
• private-vlan mode — sets the mode of the selected VLAN to community, isolated, or primary.
• switchport mode private-vlan — sets PVLAN mode of the selected port.
switchport mode private-vlan
Set PVLAN mode of the selected port.
Syntax [no] switchport mode private-vlan {host | promiscuous | trunk}
To remove PVLAN mode from the selected port, use the
no switchport mode private-vlan
command.
Parameters
host Enter the keyword host to configure the selected port or port channel as an isolated
interface in a PVLAN.
promiscuous Enter the keyword
promiscuous
to configure the selected port or port channel as an
promiscuous interface.
trunk Enter the keyword
trunk
to configure the selected port or port channel as a trunk port
in a PVLAN.
Defaults Disabled.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
1238 Private VLAN (PVLAN)