Dell S6100, Руководство по настройке

Страница: 1123 / 1743

Options: (No TOS-capability, DC, E)
LS type: Network
Link State ID: 202.10.10.2
Advertising Router: 20.20.20.8
LS Seq Number: 0x80000006
Checksum: 0xa35
Length: 36
Network Mask: /24
Attached Router: 20.20.20.8
Attached Router: 20.20.20.9
Attached Router: 20.20.20.7
Network (Area 0.0.0.1)
LS age: 252
Options: (TOS-capability, No DC, E)
LS type: Network
Link State ID: 192.10.10.2
Advertising Router: 192.10.10.2
LS Seq Number: 0x80000007
Checksum: 0x4309
Length: 36
Network Mask: /24
Attached Router: 192.10.10.2
Attached Router: 20.20.20.1
Attached Router: 20.20.20.5
Dell#
Related Commands
• show ip ospf database — display OSPF database information.
show ip ospf database nssa-external
Display NSSA-External (type 7) LSA information.
Syntax show ip ospf [ process-id | vrf vrf-name ] database nssa-external [ link-state-
id ] [adv-router ip-address ]
Parameters
process-id Enter the OSPF Process ID to show a specific process. If no Process ID is entered,
command applies only to the first OSPF process.
vrf vrf-name Enter the keyword
vrf
followeed by the name of the VRF to view NSSA-External LSA
information corresponding to the OSPF process that is tied to a specific VRF.
link-state-id (OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends on the
LSA type, and it can be one of the following:
• the network’s IP address for Type 3 LSAs or Type 5 LSAs
• the router’s OSPF router ID for Type 1 LSAs or Type 4 LSAs
• the default destination (0.0.0.0) for Type 5 LSAs
adv-router ip-
address
(OPTIONAL) Enter the keywords
adv-router
and the ip-address to display only the
LSA information about that router.
Command Modes
• EXEC
Open Shortest Path First (OSPFv2 and OSPFv3) 1123