Dell S6100, Руководство по настройке

Страница: 1096 / 1743

ip ospf network
Set the network type for the interface.
Syntax ip ospf network {broadcast | point-to-point}
To return to the default, use the
no ip ospf network
command.
Parameters
broadcast Enter the keyword
broadcast
to designate the interface as part of a broadcast
network.
point-to-point Enter the keywords
point-to-point
to designate the interface as part of a point-to-
point network.
Defaults Broadcast.
Command Modes ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
1096 Open Shortest Path First (OSPFv2 and OSPFv3)