manualshive.com logo in svg

Dell S6000-ON, Руководство по установке

Поделиться
Скачать
Dell S6000-ON Скачать руководство пользователя страница 41

Technical 
Documentation

Log in to iSupport and select the 

Documents

 tab. You can access this page without logging in using the 

Documentation

 link on the iSupport page.

Contact Information Web: 

www.dell.com

.

Telephone:

•

US and Canada: 1.866.965.5800

•

International: +1.800.456.3355

Hardware replacement request

1 

Determine the part number and serial number of the component.
To list the numbers for all components installed in the chassis, use the 

show hardware

 command.

2 

Request an RMA number from TAC by opening a support case. Open a support case by:
•

Using the Create Service Request form on the Support page.

•

Contacting Dell EMC directly by email or by phone.

•

Provide the following information when using email or phone:
•

Part number, description, and serial number of the component.

•

Your name, organization name, telephone number, fax number, and email address.

•

Shipping address for the replacement component, including a contact name, phone number, and email address.

Technical support

41

Содержание S6000-ON










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды