Dell S5840cdn Скачать руководство пользователя страница 63

Страница: 63 / 113

Action

Yes

Step 6

Temporarily disable the Web proxy servers.

Note:

Proxy servers may block or restrict you from accessing

certain Web sites including the Embedded Web Server.

Are the Web proxy servers disabled?

Go to step 7.

Contact your
administrator.

Step 7

Access the Embedded Web Server again by typing the correct IP
address in the address ﬁeld.

Did the Embedded Web Server open?

The problem is
solved.

Contact

technical

support

Unable to read ﬂash drive

Action

Yes

Step 1

Check if the ﬂash drive is inserted into the front USB port.

Note:

The ﬂash drive does not work when it is inserted into the

rear USB port.

Is the ﬂash drive inserted into the front USB port?

Go to step 2.

The problem is
solved.

Step 2

Check if the ﬂash drive is supported. For more information, see

“Supported ﬂash drives and ﬁle types” on page 23

Does the error message still appear?

Go to step 3.

The problem is
solved.

Step 3

Check if the front USB port is disabled. For more information, see

“Enabling the USB port” on page 63

Does the error message still appear?

Contact

technical

support

The problem is
solved.

Enabling the USB port

From the home screen, touch

Settings

Network/Ports

USB

Enable USB Port

Checking the printer connectivity

From the home screen, touch

Settings

Reports

Network

Network Setup Page

Check the ﬁrst section of the network setup page, and conﬁrm that the status is connected.

If the status is not connected, then the LAN drop may be inactive, or the network cable may be unplugged
or malfunctioning. Contact your administrator for assistance.

Troubleshooting

Содержание S5840cdn


















































































































Результаты поиска

Содержание S5840cdn

Отзывы:

Бренды по названию

Популярные бренды

Dell S5840cdn, Руководство пользователя

Результаты поиска

Содержание S5840cdn

Отзывы:

Бренды по названию

Популярные бренды