Dell S4048T-ON, Руководство по настройке

Страница: 120 / 1146

IP Fragment Handling
Dell Networking OS supports a configurable option to explicitly deny IP fragmented packets, particularly second and subsequent packets.
It extends the existing ACL command syntax with the
fragments
keyword for all Layer 3 rules applicable to all Layer protocols (permit/
deny ip/tcp/udp/icmp).
• Both standard and extended ACLs support IP fragments.
• Second and subsequent fragments are allowed because a Layer 4 rule cannot be applied to these fragments. If the packet is to be
denied eventually, the first fragment would be denied and hence the packet as a whole cannot be reassembled.
• Implementing the required rules uses a significant number of CAM entries per TCP/UDP entry.
• For IP ACL, Dell Networking OS always applies implicit deny. You do not have to configure it.
• For IP ACL, Dell Networking OS applies implicit permit for second and subsequent fragment just prior to the implicit deny.
• If you configure an explicit deny, the second and subsequent fragments do not hit the implicit permit rule for fragments.
• Loopback interfaces do not support ACLs using the
IP fragment
option. If you configure an ACL with the
fragments
option and
apply it to a Loopback interface, the command is accepted but the ACL entries are not actually installed the offending rule in CAM.
IP Fragments ACL Examples
The following examples show how you can use ACL commands with the
fragment
keyword to filter fragmented packets.
Example of Permitting All Packets on an Interface
The following configuration permits all packets (both fragmented and non-fragmented) with destination IP 10.1.1.1. The second rule does not
get hit at all.
Dell(conf)#ip access-list extended ABC
Dell(conf-ext-nacl)#permit ip any 10.1.1.1/32
Dell(conf-ext-nacl)# deny ip any 10.1.1.1/32 fragments
Dell(conf-ext-nacl)
Example of Denying Second and Subsequent Fragments
To deny the second/subsequent fragments, use the same rules in a different order. These ACLs deny all second and subsequent fragments
with destination IP 10.1.1.1 but permit the first fragment and non-fragmented packets with destination IP 10.1.1.1.
Dell(conf)#ip access-list extended ABC
Dell(conf-ext-nacl)# deny ip any 10.1.1.1/32 fragments
Dell(conf-ext-nacl)#permit ip any 10.1.1.1/32
Dell(conf-ext-nacl)
Layer 4 ACL Rules Examples
The following examples show the ACL commands for Layer 4 packet filtering.
Permit an ACL line with L3 information only, and the fragments keyword is present: If a packet’s L3 information matches the L3
information in the ACL line, the packet's FO is checked.
• If a packet's FO > 0, the packet is permitted.
• If a packet's FO = 0, the next ACL entry is processed.
Deny ACL line with L3 information only, and the
fragments
keyword is present: If a packet's L3 information does match the L3
information in the ACL line, the packet's FO is checked.
• If a packet's FO > 0, the packet is denied.
• If a packet's FO = 0, the next ACL line is processed.
120 Access Control Lists (ACLs)