4. Disassembly and Assembly Procedures
3
1
2
Unplug the LVDS cable from the connector of the
panel module by pushing the earing-locks.
Lift up the middle bezel and take away the middle
bezel, and put it on a fixture. U
tear off the tapes for releasing the key cables.
se a Philips-head
screwdriver to remove 3pcs screws for unlocking the
function key board with the middle bezel, and then
(No.1~3 screw size=M2x2.4, Torque=0.8
±
0.2kgfxcm
L
tear off the tape.
ift up the panel module with the bracket chassis for
releasing the front bezel away from the panel
module, and then
S7
S8
S9
Take away the bracket chassis module and then put
the bracket chassis module on a protective cushion.
Use a Philips-head screwdriver to remove 5pcs
screws for unlocking the circuit board, release all the
cables from the hooks.
(No.1 screw size=M4x8, Torque=6
±
0.5kgfxcm;
No. 2~5 screw size=M3x7.5, Torque=6
±
0.5kgfxcm)
S12
Remove the Mylar from the hooks of the bracket
chassis module
.
S11
S10
3
2
2
5
1