Dell S2417DG Скачать руководство пользователя страница 6

Страница: 6 / 45

Power Cable (Varies by
Countries)

DP Cable

USB 3.0 Upstream Cable
(Enables the USB Ports on
the Monitor)

•

Drivers and
Documentation Media

•

Quick Setup Guide

•

Safety, Environmental,
and Regulatory
Information

| About

Your

Monitor

Product Features

The

Dell S2417DG

flat panel display has an active matrix, Thin-Film Transistor (TFT),

Liquid Crystal Display (LCD) and LED backlight. The monitor features include:

•

60.47 cm (23.8-inch) viewable area (measured diagonally).

Resolution: Up to 2560 x 1440 through DisplayPort and HDMI, with full-screen
support or lower resolutions.

•

Nvidia G-Sync-enabled and 3D Vision Ready monitor, with a extremely high refresh
rate of 144 Hz (165Hz with overclock) and a rapid response time of 1 ms.

•

Color gamut of 72% NTSC.

•

Tilt, Swivel, Pivot, Height Adjustment capability

•

Removable stand and Video Electronics Standards Association (VESA™) 100 mm
mounting holes for flexible mounting solutions.

•

Digital connectivity with DisplayPort and HDMI.

•

Equipped with 1 USB upstream port and 4 USB downstream ports.

•

Plug and play capability if supported by your system.

•

On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.

Содержание S2417DG














































Результаты поиска

Содержание S2417DG

Отзывы:

Бренды по названию

Популярные бренды

Dell S2417DG, Руководство пользователя

Результаты поиска

Содержание S2417DG

Отзывы:

Бренды по названию

Популярные бренды