background image

Plug and Play Capability 

You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display 
Identification Data (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. If required, 
the user can select different settings, but in most cases monitor installation is automatic. 

LCD Monitor Quality & Pixel Policy 

During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed 
pixel that appears as an extremely tiny dark or bright discolored spot. When the pixel remains permanently lit, it is known as a "bright dot." When the pixel 
remains black, it is known as a "dark dot."  
In almost every case, these fixed pixels are hard to see and do not detract from display quality or usability. A display with 1 to 5 fixed pixels is considered 

normal and within competitive standards.  For more information, see Dell Support site at: support.dell.com.

 

Maintenance Guidelines  

Caring for Your Monitor 

   

For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor: 

l

To clean your antistatic screen, lightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the 
antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.  

l

Use a lightly-

dampened, warm cloth to clean the monitor. Avoid using detergent of any kind as some detergents leave a milky film on the monitor.  

 

l

If you notice a white powder when you unpack your monitor, wipe it off with a cloth.  

l

Handle your  monitor with care as dark

-colored monitors may scratch and show white scuff marks more than lighter-

colored monitors.  

  

l

To help maintain the best image quality on your monitor, use a dynamically changing screen saver and turn off your monitor when not in use.  

Back to Contents Page

 

 

 

Non-operating

Storage: 0° to 60° C (32° to 140° F)

 

Shipping: -

20° to 60° C (

-

4° to 140° F)

Humidity

 

Operating

10% to 80% (non-condensing)

Non-operating

Storage: 5% to 90% (non-condensing) 
Shipping: 5% to 90% (non-condensing)

Altitude

 

Operating

3,657.60 m (12,000 ft) max

Non-operating

12,192 m (40,000 ft) max

Thermal dissipation

154 BTU/hour (maximum) 
119 BTU/hour (typical)

 

CAUTION:

 Read and follow the 

Safety Instructions

 before cleaning the 

monitor. 

 

 

CAUTION:

 Before cleaning the monitor, unplug the monitor from the electrical 

outlet. 

 

Содержание S2309W - 23" LCD Monitor































Отзывы: