Dell PS4110, Руководство владельца оборудования

Страница: 8 / 48

Hardware Owner's Manual
1 Basic Storage Array Information
Table 1 describes the front panel features.
Figure 3: Front Panel Features and Indicators (3.5-inch Drives)
Figure 4: Front Panel Features and Indicators (2.5-inch Drives)
Table 1: Front Panel Feature Descriptions
Item Indicator Icon Description
1
Array status
LED
The array status LED lights when the array power is on.
• Off—No power.
• Steady blue—Array status is OK.
• Slow blinking blue—Array status is Standby mode.
• Blinking blue—Administrator request to identify the array (see the Group
Manager online help).
• Steady amber—Critical status.
• Blinking amber—Warning.
2 Power LED
The power LED is ON when at least one power supply is supplying power to the
array.
• Off—No power, or the array is in Standby mode.
• Steady green—Array has at least one power supply providing power, and
array is not in Standby mode.
3
Drive Release
Latch
None Enables you to remove a drive from the array.
Note: The LEDs are part of a built-in chassis control panel that is not hot-swappable and can be replaced only
by support personnel. During the array power-up sequence, these LEDs will cycle through different states until
the array is fully started and the active control module has been determined.
4