b.
cover
6.
Follow the procedure in
After Working Inside Your Computer
.
Removing the intrusion switch
1.
Follow the procedure in
Before Working Inside Your Computer
.
2.
Remove the:
a.
cover
b.
heat sink fan cover
3.
To remove the intrusion switch:
a. Disconnect the intrusion switch cable from the connector on the system board [1, 2].
b. Slide the intrusion switch and lift it away from the computer [3].
Installing the intrusion switch
1.
Insert the intrusion switch into the slot on the chassis.
2.
Connect the intrusion switch cable to the system board.
3.
Install the:
a.
heat sink fan cover
b.
cover
4.
Follow the procedure in
After Working Inside Your Computer
.
Removing the memory module
1.
Follow the procedure in
Before Working Inside Your Computer
.
2.
Remove the:
a.
cover
b.
hard drive
c.
optical drive
3.
To remove the memory module:
a. Press the memory module retention tabs on both sides of the memory module.
b. Lift the memory module from the memory module connector on the system board.
13