Dell Precision T1600 Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 89

Dell Precision T1600 Скачать руководство пользователя страница 57

System Configuration

Serial Port

Identifies and defines the serial port settings. You can set the
serial port to:

•

Disabled

•

COM1

•

COM2

•

COM3

•

COM4

NOTE: The operating system may allocate resources even
though the setting is disabled.

SATA Operation

Configures the operating mode of the integrated hard drive
controller.

•

RAID Autodetect / AHCI = RAID if signed drives, otherwise

AHCI.

•

RAID Autodetect / AATA = RAID if signed drives, otherwise

ATA.

•

RAID ON / ATA = SATA is configured for RAID on every boot.

•

Legacy = The hard drive controller is configured for legacy

mode

NOTE: Legacy mode provides for compatibility with some
older operating systems that do not support native resources
assigned to the drive controller. RAID Mode is incompatible
with ImageServer. Please disable RAID mode if enabling
ImageServer.

Drives

These fields let you enable or disable various drives on board:

•

SATA-0

•

SATA-1

•

SATA-2

•

SATA-3

Smart Reporting

This field controls whether hard drive errors for integrated drives
are reported during system startup. This technology is part of the
SMART (Self Monitoring Analysis and Reporting Technology)
specification. This option is disabled by default.

57

«
...
55
56
57
58
59
...
»

Содержание Precision T1600


























































































Отзывы:

Нет отзывов