Dell Precision Mobile Workstation M6700 Скачать руководство пользователя страница 73

Страница: 73 / 87

To enter the System Setup, press <F2> immediately after a power-on or reboot.

In the System BIOS or System Setup screen, select System Security and press <Enter>.
The System Security screen is displayed.

In the System Security screen, verify that Password Status is Unlocked.

Select System Password, alter or delete the existing system password and press <Enter> or <Tab>.

Select Setup Password, alter or delete the existing setup password and press <Enter> or <Tab>.

NOTE: If you change the System and/or Setup password, re-enter the new password when promoted. If you
delete the System and/or Setup password, confirm the deletion when promoted.

Press <Esc> and a message prompts you to save the changes.

Press <Y> to save the changes and exit from the System Setup.
The computer reboots.

Содержание Precision Mobile Workstation M6700
























































































Результаты поиска

Содержание Precision Mobile Workstation M6700

Отзывы:

Похожие инструкции для Precision Mobile Workstation M6700

Бренды по названию

Популярные бренды

Dell Precision Mobile Workstation M6700, Руководство пользователя

Результаты поиска

Содержание Precision Mobile Workstation M6700

Отзывы:

Похожие инструкции для Precision Mobile Workstation M6700

Бренды по названию

Популярные бренды