manualshive.com logo in svg

Dell Precision M70, Руководство по обслуживанию, Страница: 46 / 46

Поделиться
Скачать
Dell Precision M70 Скачать руководство пользователя страница 46

Back to Contents Page

  

 

 Video Card Assembly  

Dell Precision™ M70 Service Manual

 

 

 

 

Removing the Video Card Assembly 

 

 

 

 

1.

Follow the instructions in "

Preparing to Work Inside the Computer

."  

 

 

  

2.

Remove the 

display assembly

.  

 

 

  

3.

Remove the 

keyboard

.  

 

 

  

4.

Remove the 

palm rest

.  

 

 

  

5.

Loosen the four M2.5 corner screws (marked with a triangle on the thermal-cooling assembly) from the video card assembly. These screws connect the 
video-card thermal-cooling assembly to the system board.  
 

  

 

 

6.

Lift the video card assembly straight up and out of the computer.  
 

Back to Contents Page

 

 

 

 

CAUTION: 

Before performing the following procedures, read the safety instructions in your 

Product Information Guide

.

 

NOTICE: 

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such 

as the back panel) on the computer.

 

NOTICE: 

Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.

1  M2.5 x 5-mm corner 

screws 

2  video card assembly 

Содержание Precision M70















































Отзывы:

Нет отзывов