Dell Precision 7750, Руководство по обслуживанию

Страница: 60 / 103

Steps
1. Remove the two (M2x3) screws that secure the power button assembly with fingerprint reader in its slot on the computer.
2. Remove the power button assembly with fingerprint reader from the computer.
Installing the power button assembly with fingerprint
reader
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the power button and provides a visual representation of the installation procedure.
Steps
1. Place the power button assembly with fingerprint reader into its slot on the computer.
2. Replace the two (M2x3) screws to secure the power button assembly with fingerprint reader in place.
Next steps
1. Install the power button board assembly with fingerprint reader .
2. Install the heat-sink assembly .
3. Install the battery .
4. Install the base cover .
5. Install the SD card .
6. Follow the procedure in after working inside your computer .
60 Demontowanie i montowanie