Hard drive assembly
Installing the hard drive assembly
NOTE:
The Hard drive assembly can be installed only on systems with a 4-cell battery.
1
Follow the procedure in
Before working inside your computer
.
2
Remove the SD card:
a Press the SD card in to release it from the system.
b Remove the SD card out of the system.
3
Remove the base cover:
a Loosen the 7 captive screws that secure the base cover to the system [1].
b Pry open the base cover starting from the two recess point at the top edge of the system [2].
c Pry around the all the edges of the base cover [3].
d Remove the base cover from the system [4].
2
8
Hard drive assembly
Содержание Precision 7530
Страница 1: ...Dell Precision 7530 Hard Drive Assembly Installation Guide ...
Страница 14: ...9 Install the SD card a Slide the SD card into its slot until it clicks into place 14 Hard drive assembly ...
Страница 15: ...10 Follow the procedure in After working inside your computer Hard drive assembly 15 ...