Dell PowerVault MD3260i Series Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 57

background image

3.

Log on to the target:

iscsicli PersistentLoginTarget Target_Name

Report_To_PNP Target_Portal_Address

TCP_Port_Number_Of_Target_Portal * * *

Login_Flags * * * * * Username Password

Authtype * Mapping_Count

where

–

<Target_Name>

is the target name as displayed in the target list. Use the iscsicli ListTargets command

to display the target list.

–

<Report_To_PNP >

is T, which exposes the LUN to the operating system as a storage device.

–

<Target_Portal_Address>

is the IP address of the iSCSI port on the controller being logged in to.

–

<TCP_Port_Number_Of_Target_Portal>

is 3260.

–

<Login_Flags>

is 0x2 to enable multipathing for the target on the initiator. This value allows more than

one session to be logged in to a target at one time.

–

<Username>

is the initiator name.

–

<Password>

is the target CHAP secret.

–

<Authtype>

is either 0 for no authentication, 1 for Target CHAP, or 2 for Mutual CHAP.

NOTE:

<Username>

,

<Password

>, and

<Authtype>

are optional parameters. They can be

replaced with an asterisk (*) if CHAP is not used.

–

<Mapping_Count>

is 0, indicating that no mappings are specified and no further parameters are

required.

* * * An asterisk (*) represents the default value of a parameter.
For example, your log on command may look like this:

iscsicli PersistentLoginTarget iqn.1984-

05.com.dell:powervault.6001372000ffe3332xx0000046

72edf2 3260 T 192.168.130.101 * * * 0x2 * * * * * * * * * 0

To view active sessions to the target, run the following command:

iscsicli SessionList

To support storage array controller failover, the host server must be connected to at least one iSCSI port on each
controller. Repeat step 3 for each iSCSI port on the storage array that you want to establish as a failover target. The

Target_ Portal_Address

is different for each port you connect to.

PersistentLoginTarget

does not initiate a login to the target until after the system is rebooted. To

establish immediate login to the target, substitute

LoginTarget

for

PersistentLoginTarget

.

NOTE: See the

Microsoft iSCSI Software Initiator 2.x User’s Guide

for more information about the commands

used in the previous steps. For more information about Windows Server 2008 Server Core, see the Microsoft
Developers Network (MSDN) at microsoft.com.

For Linux Server

In MD Storage Manager, the Configure iSCSI Host Ports displays the status of each iSCSI port you attempt to connect
and the configuration state of all IP addresses. If either displays Disconnected or Unconfigured respectively, check the
following and repeat the iSCSI configuration steps:

•

Are all cables securely attached to each port on the host server and storage array?

•

Is TCP/IP correctly configured on all target host ports?

•

Is CHAP set up correctly on both the host server and the storage array?

43

«
...
41
42
43
44
45
...
»

Содержание PowerVault MD3260i Series


























































Отзывы:

Нет отзывов

Похожие инструкции для PowerVault MD3260i Series

ThinkCentre 9212

Бренд: IBM Страницы: 42

ThinkCentre 8143

Бренд: IBM Страницы: 64

ThinkCentre 8129

Бренд: IBM Страницы: 36

Бренд: IBM Страницы: 44

Бренд: IBM Страницы: 66

RS/6000 7043 43P Series

Бренд: IBM Страницы: 273

Бренд: IBM Страницы: 38

Бренд: IBM Страницы: 46

Бренд: IBM Страницы: 265

Бренд: IBM Страницы: 163

Бренд: IBM Страницы: 17

Бренд: ARE Страницы: 39

SPARC classic X

Бренд: Sun Microsystems Страницы: 198

Millenium Studio Desk WS20

Бренд: thomann Страницы: 2

DESK-V000EB V000EB

Бренд: Vivo Страницы: 2

Neomounts FPMA-MOBILE1800

Бренд: NewStar Страницы: 8

Compaq Evo D310 MT

Бренд: Compaq Страницы: 57

Бренд: Light Blue Optics Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды