manualshive.com logo in svg

Dell PowerVault MD3000i, Руководство CLI

Поделиться
Скачать
Dell PowerVault MD3000i Скачать руководство пользователя страница 160

160

Script Commands

 

NOTICE: 

Ensure that the multipath driver is running before you use this command, 

or the virtual disk will not be accessible.

 

NOTE: 

Under certain host operating system environments, you might be required to 

reconfigure the multipath host physical disk. You might also need to make operating 
system modifications to recognize the new I/O path to the virtual disks.

Revive Disk Group

This command forces the specified disk group and associated failed physical 
disks to the Optimal state. All physical disks assigned to the disk group must 
be installed before you attempt to run this command.

 

NOTICE: 

Correct use of this command depends on the data configuration on all of 

the physical disks in the disk group. Never attempt to revive a physical disk unless 
supervised by a Customer or Technical Support representative.

 

NOTICE: 

Do not attempt to run this command o a disk group that is in the Degraded 

state. Running this command on a disk group that is in the Degraded state can 
cause loss of access to the data on the physical disks in the disk group.

Syntax

revive diskGroup [

diskGroupNumber

]

Parameters

Revive Physical Disk

This command forces the specified physical disk to the Optimal state.

 

NOTICE: 

Correct use of this command depends on the data configuration on all 

physical disks in the disk group. Never attempt to revive a physical disk unless 
supervised by a Technical Support representative.

Syntax

revive physicalDisk [

enclosureID,slotID

]

Parameter

Description

diskGroup

Number of the disk group to be set to the Optimal state. You 
must put brackets ([ ]) around the disk group number.

Содержание PowerVault MD3000i













































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды