Dell PowerVault LTO5-140 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 93

background image

Chapter 2. Setting Up the Tape Drive

v

“Pre-installed Internal Drives”

v

“Installing Internal Drives”
– “Installing the Internal Drive - Step-By-Step Instructions”

v

“Installing External and Rack Mount Drives” on page 2-5
– “Installing the External Drive - Step-By-Step Instructions” on page 2-5

v

“Verifying Drive Operation” on page 2-7

v

“Loading Device Drivers” on page 2-7

v

“Ethernet Service Port Procedures” on page 2-8

Pre-installed Internal Drives

Dell performs the installation and setup of internal tape drives that are shipped as
part of a system. If tape backup software is included in your system, refer to the
installation instructions included with the software.

For the latest supported software versions, go to the Dell support website
http://support.dell.com or visit the support site of your backup software vendor.

Installing Internal Drives

If your internal tape drive is not pre-installed, the installation instructions are
described in the following sections:

Installing the Drive — Prerequisites

The Dell PowerVault tape drive is a 6 Gb SAS device with a burst transfer rate of
600 MB per second. It is recommended that you use a dedicated SAS host bus
adapter for this tape drive.

Mounting Bay

You need one industry-standard, 5 1/4 inch, half-height bay in which to install the
PowerVault tape drive. The only supported mounting configurations are
horizontally with the base of the drive parallel to the ground, or vertically with
either the left or right side of the drive parallel to the ground.

Install and configure the drive according to the instructions provided in the Dell
documentation for your system.

Mounting Hardware

Most systems use trays or rails to mount the tape drive. If the mounting hardware
is pre-installed, you can simply slide the drive into the mounting bay. Some
systems do not use slides or rails and drives must be fixed in place with screws.

Installing the Internal Drive - Step-By-Step Instructions

Procedure

1.

Unpacking the Drive

2-1

«
...
15
16
17
18
19
...
»

Содержание PowerVault LTO5-140






























































































Отзывы:

Нет отзывов

Похожие инструкции для PowerVault LTO5-140

Бренд: National Instruments Страницы: 93

Professional Computer

Бренд: Wang Страницы: 276

SuperWorkstation 5038A-IL

Бренд: Supero Страницы: 122

Бренд: ZIEHL-ABEGG Страницы: 84

Бренд: Kontron Страницы: 68

Бренд: PRESONUS Страницы: 8

Бренд: Everex Страницы: 47

Бренд: Precision Страницы: 5

EBOX-3310MX-S4C

Бренд: DMP Electronics Страницы: 41

Personal System/2 50

Бренд: IBM Страницы: 62

Бренд: IBM Страницы: 50

Бренд: IBM Страницы: 84

Dimension 0F0272A01

Бренд: Dell Страницы: 2

Бренд: Dell Страницы: 23

Chromebook 3100

Бренд: Dell Страницы: 21

Бренд: Dell Страницы: 57

Бренд: Dell Страницы: 64

Бренд: Dell Страницы: 95

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды