Using the System Setup Program: Dell PowerVault 735N Systems Service Manual
file:///C:/Users/Phebega_Pericho/Desktop/spv735N/en/sm/setup.htm[3/15/2013 4:18:21 PM]
Keyboard Errors
Enables or disables the reporting of keyboard errors during POST.
Boot Sequence
Determines whether the system boots from
Diskette First
(the default),
Hard-Disk
Only
, or
Device List,
Ctrl–>
. Press <Ctrl> and the right-arrow key to select from
devices on the
Device List
screen.
System Password
Displays the current status of the password security feature. The settings are
Not
Enabled
(the default),
Enabled
, and
Disabled by Jumper
.
Password Status
Prevents the system password from being changed or disabled at system start-up.
Unlocked
is the default setting.
Setup Password
Restricts access to the setup program. Overrides system password. The settings
are
Not Enabled
(the default),
Enabled
, and
Disabled by Jumper
.
USB
The system's Universal Serial Bus (USB) ports can be
Enabled
(the default) or
Disabled
.
Mouse
The built-in PS/2-compatible mouse port can be
Enabled
(the default) or
Disabled
. Disabling the mouse allows an expansion card to use IRQ 12.
Serial Port 1
Serial Port 2
Configures the built-in serial ports. Options are
Auto
(the default) to automatically
configure a port, a particular designation (
COM1
or
COM3
for
Serial Port 1
;
COM2
or
COM4
for
Serial Port 2
), or
Off
(port is disabled).
Parallel Port
Configures the built-in parallel port. The default address is
378h
. Alternate
addresses are
278h
or
3BCh
. Set to
Off
to disable the parallel port.
NOTE: Do not set
Parallel Port
to
278h
if you have an Extended Capabilities
Port (ECP) device connected to the port.
Parallel Mode
Controls whether the built-in parallel port acts as an
AT
-compatible (unidirectional)
or
PS/2
-compatible (bi-directional) port. Refer to the documentation that came
with the device to determine the correct setting.
PS/2
is the default.
Diskette
Controls the operation of the system's integrated diskette drive controller.
Auto
(the default) turns off the built-in diskette drive controller (when necessary)
to accommodate a controller card installed in an expansion slot.
Write Protect
prevents anything from being written to diskette drives using the
system's built-in diskette drive controller. Read access is enabled. When
Write
Protect
is selected,
Auto
is also selected.
Off
turns off the integrated diskette controller for diagnostics testing.
NIC
Turns the integrated network interface controller (NIC)
On
(the default) or
Off
. A
reboot is needed for a change to take effect.
NIC MAC Address
Displays the media access control (MAC) address used by the integrated
NIC. This field has no user-selectable settings.
SCSI
If the integrated RAID controller is installed, turns the integrated
SCSI
Controller
On
or
Off.
