support.dell.com
Dell PowerVault 56F Systems Rack Installation Guide
3
" $
NOTE: For instructions on installing the PowerVault switch itself, see”Installing the
Switch in the Rack” found later in this guide.
To install the rack kit in the rack, perform the following steps:
1.
Remove the rack’s front and back doors.
2.
Install the slide assemblies in the rack.
The subsections that follow include instructions for performing these tasks.
&)*+,+*,
You must remove the doors from the rack to provide access to the interior of the rack
and to prevent damage to the doors while installing the switch. To remove the doors,
perform the following steps.
#!
"
1.
Open the latch on the front door.
If you have a 24-U (1 U=1.75 inches) rack cabinet
, unlock and twist the handle
clockwise and open the door (see Figure 2).
886nceb0.book Page 3 Friday, April 14, 2000 9:37 AM
Содержание PowerVault 50F
Страница 1: ... 886nceb0 book Page 3 Friday April 14 2000 9 37 AM ...
Страница 12: ...xiv 886nceb0 book Page xiv Friday April 14 2000 9 37 AM ...
Страница 14: ...xvi 886nceb0 book Page xvi Friday April 14 2000 9 37 AM ...
Страница 26: ...12 Dell PowerVault 56F Systems Rack Installation Guide 886nceb0 book Page 12 Friday April 14 2000 9 37 AM ...