Dell PowerVault 136T, Конфигурации

Страница: 9 / 58

Dell PowerVault 136T LTO Tape Library
7
Troubleshooting
• The LTO drive keeps posting a "!7" when a backup or restore job
is submitted:
If an LTO-3 media is loaded into an LTO-2 drive, the LTO-2 drive will
post a '!7' indicating an unrecognized media resource.
– Remove the piece of media manually from the drive and verify that
the media has the correct bar code label applied to it. See "Media
Bar Code Labels" for specific details.
– Check that extended bar codes are enabled. See "Media Bar Code
Labels" for specific details.
– Ensure that your backup application has bar code rules, media
pools, or drive pools correctly implemented. See the backup
software user's manual.
• The RMU does not recognize the LTO-2 or LTO-3 drives:
This is normal if the RMU has an older version of the firmware. Update
the RMU to firmware 193D.00002 or later.
• The library may display a SAC 42 error:
An incorrect library configuration is detected.
This is normal if the library is at a version prior to firmware 3.33.
Update to library firmware 3.35 or later.
• The library displays an error:
Your library firmware versions do not match.
Download the latest version to the library
.
This is normal if the library or drive firmware is outdated. Access the
Dell Support website at
support.dell.com and update library or drive
firmware to the latest version.
• The library displays an error.
One or more drives have downlevel firmware. You
may wish to update these drives. See User's Guide.
This is normal if the library or drive firmware is outdated. Update the
library firmware and drive firmware to the latest version.