manualshive.com logo in svg

Dell poweredge VRTX, Справочное руководство

Поделиться
Скачать
Dell poweredge VRTX Скачать руководство пользователя страница 429

SubCategory

PDR = Physical Disk

Severity

Severity 3 (Informational)

Trap/EventID

4347

LCD Message

No LCD message display defined.

Initial Default.

SNMP Alert;#LCD;#Remote System Log

Filter 

Visibility

IPMI Alert SNMP 

Alert

Email 

Alert

LC Log

LCD

Power Off Power 

Cycle

Reset

TRUE

FALSE

TRUE

TRUE

TRUE

TRUE

FALSE

FALSE

FALSE

PDR5

Message

arg1

is removed.

Arguments

•

arg1 = 

PD Name

Detailed 
Description

A physical disk has been removed from the disk group. This alert can also be caused by loose 
or defective cables or by problems with the enclosure.

Recommended 
Response Action

Do one of the following: 1) If a physical disk was removed from the disk group, either replace 
the disk or restore the original disk. Identify the disk that was removed by locating the disk that 
has a red "X" for its status. 2) Perform a rescan after replacing or restoring the disk. 3) If a disk 
was not removed from the disk group, then check for cable problems. Refer to product 
documentation for more information on checking the cables. 4) Make sure that the enclosure is 
powered on. 5) If the problem persists, check the enclosure documentation for further 
diagnostic information.

Category

Storage

SubCategory

PDR = Physical Disk

Severity

Severity 2 (Warning)

Trap/EventID

4346

LCD Message

No LCD message display defined.

Initial Default.

SNMP Alert;#LCD;#Remote System Log

Filter 

Visibility

IPMI Alert SNMP 

Alert

Email 

Alert

LC Log

LCD

Power Off Power 

Cycle

Reset

TRUE

FALSE

TRUE

TRUE

TRUE

TRUE

FALSE

FALSE

FALSE

PDR6

Message

arg1

is offline.

Arguments

•

arg1 = 

physical disk

429

Содержание poweredge VRTX




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды