manualshive.com logo in svg

Dell PowerEdge T310, Руководство владельца оборудования

Поделиться
Скачать
Dell PowerEdge T310 Скачать руководство пользователя страница 15

About Your System

15

Figure 1-2.

LCD Panel Features

Home Screen

The Home screen displays user-configurable information about the system. 
This screen is displayed during normal system operation when there are no 
status messages or errors present. When the system is in standby mode, 

Item

Buttons

Description

1

Left

Moves the cursor back in one-step increments.

2

Select

Selects the menu item highlighted by the cursor.

3

System identification

Turns the system ID mode on (LCD panel 
flashes blue) and off.

Press quickly to toggle the system ID on and off. 
If the system hangs during POST, press and hold 
the system ID button for more than five seconds 
to enter BIOS Progress mode.

4

Right

Moves the cursor forward in one-step increments.

During message scrolling:

• Press once to increase scrolling speed.

• Press again to stop.

• Press again to return to default scrolling speed.

• Press again to repeat the cycle.

1

4

3

2

book.book  Page 15  Wednesday, August 19, 2009  4:40 PM

Содержание PowerEdge T310



































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды