manualshive.com logo in svg

Dell PowerEdge R740xd, Инструкция по установке и обслуживанию, Страница: 40 / 210

Поделиться
Скачать
Dell PowerEdge R740xd Скачать руководство пользователя страница 40

Pre-operating system management applications

You can manage basic settings and features of a system without booting to the operating system by using the system firmware.

 

Topics:

•

Options to manage the pre-operating system applications

•

System Setup

•

Dell Lifecycle Controller

•

Boot Manager

•

PXE boot

Options to manage the pre-operating system 

applications

Your system has the following options to manage the pre-operating system applications:

•

System Setup

•

Dell Lifecycle Controller

•

Boot Manager

•

Preboot Execution Environment (PXE)

Related link

System Setup
Dell Lifecycle Controller
Boot Manager
PXE boot

System Setup

By using the 

System Setup

 screen, you can configure the BIOS settings, iDRAC settings, and device settings of your system.

NOTE: 

Help text for the selected field is displayed in the graphical browser by default. To view the help text in the text browser, 

press F1.

You can access system setup by using two methods:

•

Standard graphical browser—The browser is enabled by default.

•

Text browser—The browser is enabled by using Console Redirection.

Related link

System Setup details
Viewing System Setup

5

40

Pre-operating system management applications

Содержание PowerEdge R740xd



















































































































































































































Отзывы:

Нет отзывов