Item
Indicator, Button, or
Connector
Icon
Description
NOTE: On ACPI compliant operating systems,
when the power button is used to shutdown
the system, the operating system performs a
graceful shut down the system power is
turned off.
3
NMI button
Enables you to troubleshoot software and device
driver errors when running certain operating
systems. This button can be pressed by using the
end of a paper clip.
NOTE: Use this button only if directed to do
so by qualified support personnel or by
instructions in the operating system’s
documentation.
4
Information tag
Contains system information such as service tag,
NIC, MAC address for your reference. The
information tag is a slide-out label panel.
5
Hard drives
Up to twenty four 2.5 inch hot-swappable hard
drives or solid state drives (SSD).
6
USB management port/
iDRAC Direct
The USB management port is USB 2.0 compliant.
Enables you to connect USB devices to the system
or provides access to the iDRAC Direct features.
For more information, see the Integrated Dell
Remote Access Controller User’s Guide at
Dell.com/idracmanuals
.
7
Video connector
Enables you to connect a display to the system.
8
Quick Sync (optional)
Indicates a Quick Sync enabled system. The Quick
Sync feature is optional and needs a Quick Sync
bezel. This feature allows management of the
system by using mobile devices. This feature
aggregates hardware or firmware inventory and
various system level diagnostic and error
information that can be used in troubleshooting
the system. For more information, see the
Integrated Dell Remote Access Controller User’s
Guide at
Dell.com/idracmanuals
.
12
