CAUTION: Do not remove an installed Trusted Platform Module (TPM). Any attempt to remove an
installed TPM from the system board may damage the TPM.
Steps
1.
Align the edge connectors on the TPM with the slot on the TPM connector.
2.
Insert the TPM into the TPM connector such that the plastic bolt aligns with the slot on the system
board.
3.
Press the plastic bolt until the bolt snaps into place.
Figure 62. Installing the TPM
1.
TPM
2. TPM connector
3. slot on the TPM connector
4. plastic bolt
5. slot on the system board
Re-enabling the TPM for BitLocker users
Initialize the TPM.
For more information on initializing the TPM, see
http://technet.microsoft.com/en-us/library/
cc753140.aspx
.
The
TPM Status
changes to
Enabled, Activated
.
Re-enabling the TPM for TXT users
1.
While booting your system, press <F2> to enter System Setup.
2.
In the
System Setup Main Menu
, click
System BIOS
→
System Security Settings
.
3.
In the
TPM Security
option, select
On with Pre-boot Measurements
.
4.
In the
TPM Command
option, select
Activate
.
134
