Dell PowerEdge R530xd, Руководство пользователя

Страница: 52 / 163

2. Follow the procedure listed in Before working inside your system .
3. Remove the cooling shroud.
Steps
1.
Slide the intrusion switch into the intrusion switch slot.
2. Connect the intrusion switch cable to the connector on the system board.
Next steps
1. Install the cooling shroud.
2. Follow the procedure listed in After working inside your system .
Related Tasks
Removing the cooling shroud
Installing the cooling shroud
System memory
Your system supports DDR4 registered DIMMs (RDIMM).
NOTE: MT/s indicates DIMM speed in MegaTransfers per second.
Memory bus operating frequency can be 2133 MT/s, 1866 MT/s, 1600 MT/s, or 1333 MT/s depending on:
• DIMM type ( RDIMM or LRDIMM)
• Number of DIMMs populated per channel
• System profile selected (for example, Performance Optimized, Custom, or Dense Configuration
Optimized)
• Maximum supported DIMM frequency of the processors
Your system contains 16 memory sockets split into four sets of four sockets. DIMMs in sockets A1 to A8
are assigned to processor 1 and DIMMs in sockets B1 to B8 are assigned to processor 2. Each 4-socket
set is organized into two channels. In each channel of the 4-socket set, the release levers of the first
socket are marked white and those of the second socket are marked black.
52