Figure 63. Installing the PSU blank
1
PSU blank
2
PSU bay
Removing an AC power supply unit
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage
due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are
shipped with your product.
CAUTION:
The system needs one power supply unit (PSU) for normal operation. On power-redundant systems, remove and
replace only one PSU at a time in a system that is powered on.
NOTE:
You may have to unlatch and lift the optional cable management arm if it interferes with the power supply unit (PSU)
removal. For information about the cable management arm, see the system’s rack documentation.
Steps
1
Disconnect the power cable from the power source and from the PSU you intend to remove, and then remove the cables from the
strap.
2
Press the release latch and slide the PSU out of the chassis by using the PSU handle.
130
Installing and removing system components
