4.1.2
Rear view of Dell R330XL server
The following image illustrates the rear view of the Dell R330XL server.
Figure 4.2 Rear View of Dell R330XL Server
The following are the explanation for the items in the image.
1. Serial connector
2. vFlash card slot (optional)
3. iDRAC port (optional)
4. PCIe expansion card slots (2)
5. Power supply unit (PSU1 and PSU2)
6. USB connectors
7. Ethernet connectors
8. System identification button
9. System identification connector
10. Video connector
4.2
Network connections
Each Honeywell-configured platform must be connected to an ETHERNET network.
l
l
4.2.1
Ethernet network
ETHERNET 10/100/1000 Base T connection is the standard connection used on the Honeywell-
configured platform. An on-board dual NIC must be used for FTE configuration.
4.2.2
ControlNet Network
A ControlNet Network is a single coaxial trunk cable broken up into segments interconnected by links.
Node Connections to the network are created through a Tap and drop cable. Repeaters are used to link
segments together and for changes in media from coax to fiber optic. All points on the network must
- 35 -
Chapter 4 - Operation
